5
II.
Warning
1.
DO NOT
turn off the machine when the task is under execution. It may
damage the duplicator or drives.
2.
DO NOT
remove drives when the task is under execution. It may damage
the duplicator or drives.
3. The master channel cannot be written (only can be read) to avoid damaging
the data in the master drive.
III. Menu
1. Copy
This command will copy the master disc placed in the designated Source Drive
to all target discs in the Writer Drives. This process burns all data contained on
the master disc to the target discs so the copies are exact duplicates of the
master disc.
2. Test
This command will simulate the copy process and make sure all target discs
are usable. The test process does NOT burn anything to the blank disc(s). A
built-in diagnostic algorism is used to verify the chance of successful copy for
each target disc.
ENT
2. Test
# 0: 2048MB => 3
Test x 3 2048M
50% 1024M
Result
Pass: 3 Fail: 0
3 target discs are inserted
Test in process
Final result
Master disc is inserted
5 target discs are inserted
No Disc is inserted
ENT
Result:
Pass: 5 Fail: 0
x 5:
number of target.
2048M
: source capacity
10%:
rate of progress
8.9X:
burning speed
204M:
copied size
1. Copy
# 0: No Disc => 0
1. Copy
# 0: 2048MB => 0
1. Copy
# 0: 2048MB => 5
Copy x 5 2048M
10%
204M
Coping process
Final result
