1.4 USB to USB
This copy mode will copy the data from the source USB drive to the target USB
drive. Only the available data will be copied. Most of the file system formats
are supported, including Windows FAT16, FAT32, exFAT, NTFS; Linux ext2,
ext3, ext4; Mac HFS/HFS+.
Note
:
1.
This function is only available on the Media Maven Plus model.
2. The original data content of target USB drive will be erased after the copy
process. Please make sure the data can be erased before copy.
2. Test
This command will simulate the copy process and make sure all target discs
are usable. The test process does NOT write anything to the blank disc(s). A
built-in diagnostic algorism is used to verify the chance of successful copy for
each target disc.
Note:
Test mode can only be done with BD-R, DVD-R and CD-R media.
3. Copy + Verify
This command will perform the copy process, and immediately follow with a
verification process on all target discs automatically. This command is useful
especially for audio CD duplication.
ENT
2. Test
# 0 : 2048MB => 0
Test x 3 2048M
50% 8.9X 1024M
Result
Pass 3 Fail 0
ENT
Verify x 3 2048M
50% 8.9X 1024M
Result
Pass 3 Fail 0
3. Copy + Verify
# 0 : 2048MB=> 0
Copy x 3 2048M
50% 8.9X 1024M
Copy process is
finished
ENT
[ Copy ]
4. USB To USB
Data Will Be Erased!
Continue
Copy: 1 2048M
P : 0 F : 0 10%
ENT
Result :
Pass 1 Fail 0
Copy:1: 1 target USB
2048M: source data
P: number of copies passed
F: number of copies failed
10%: rate of copy progress
8
