Note
: The verification process uses a
Disc Readability Check
to individually
check the presence of data on each copy. This process does not compare the
contents of duplicated discs against that of the source. It only verifies that the
duplicated discs are readable.
4. Copy + Compare
This command will perform the copy process, and immediately follow with a
comparison between the source disc and the copied disc(s) automatically to
ensure the copies are the exact duplicates of the source disc. This command is
especially useful for BDs, DVDs, data CDs and video CDs.
Note
:
1. The Compare process is a bit-by-bit comparison between the source disc
and the copied discs.
2. This operation ensures that all of the copies are completely identical to the
Source disc.
3. This command is not applicable to audio CDs.
5. Verify
This command verifies readability on the target discs. It is especially useful for
audio CD duplication.
6. Compare
This command compares copied disc(s) to the source disc and ensures that
the copies are the exact duplicates of the source disc. It is especially useful for
BDs, DVDs, data CDs and video CDs.
Compare x 3 2048M
50% 8.9X 1024M
Result
Pass 3 Fail 0
4. Copy + Compare
# 0 : 2048MB=> 0
Copy x 3 2048M
50% 8.9X 1024M
Copy process is
finished
ENT
5. Verify
# 0 : 2048MB => 0
Verify x 3 2048M
50% 8.9X 1024M
Result
Pass 3 Fail 0
ENT
6. Compare
# 0 : 2048MB => 0
Compare x 3 2048M
50% 8.9X 1024M
Result
Pass 3 Fail 0
9
