5
III. Asynchronous Operation
Asynchronous Operation
is designed for the duplicator. It means that the duplicator will read the
data from source device into system memory buffer and start to execute a task immediately when
target device(s) inserted. Duplicator does not have to wait for all target device(s) inserted in order to
start the execution of the task at the same time. No matter the data size of the source device,
duplicator can asynchronously execute a task.
1. Insert source media into the source port, select the task to execute from the menu, and press ENT
button. Duplicator will start to execute the task.
2. Target devices can be plugged in during the execution process, and will start to execute the task
immediately
3. Target device can be removed when it finishes the execution process and its green LED is solid
on. New target device can be plugged into the same port for execution of the task again.
4. LCD display will show the percentage of execution process, the number of successful and failed
target(s). Here the percentage of execution process displayed is only for the least processed target
device.
5. During the execution process, the status of each target device can be checked by using the ▲ and
▼ buttons.
6. After the task is done for all target devices, press ESC button to exit from the task. LCD display
will show the total number of successful and failed target(s).
7. Each USB port executes the task asynchronously, doesn’t need to wait for all target devices to be
ready at same time.
