6
IV. Menu Overview
1.
Copy
To copy from source device to target device(s) bit by bit and only copy available data area.
When the source device reads fail, all target devices stop copying. When one of the target
devices writes fail, it will stop copying.
2.
Compare
This command allows comparing the copied target devices against the source for accuracy.
ENT
Insert source device
and press ENT button
No source device
Copy
：
0 1100M
00:00 Wait
1. Copy
Source Not Ready
1. Copy
Ready device: 0
Copy: 0
number of targets
1100M
: data to be copied
00:00:
executing time
Wait
: Waiting for target
drives to be inserted
Copy is finished, the target
devices can be unplugged and
new target devices can be
inserted to start copy again. Or
press ESC button to end the
copy process.
Copy: 0
1100M
P: 4 F: 0 Wait
Copy starts automatically when
target devices are inserted
Copy
：
4 1100M
00:10 10%
ENT
No source device
Compare
：
0 1100M
00:00 Wait
2. Compare
Source Not Ready
1. Compare
Ready device: 0
Result: 01:31
Pass
：
4 Fail
：
0
Compare
：
4 1100M
00:10 10%
ESC
Result: 01:31
Pass
：
4 Fail
：
0
ESC
Press ESC button to end
the copy process.
Insert source device
and press ENT button
Compare starts automatically
when target devices are inserted
Press ESC button to end
the compare process.
Compare is finished, the target
devices can be unplugged and
new target devices can be
inserted to start compare again.
Or press ESC button to end the
compare process.
Compare: 0
1100M
P: 4 F: 0 Wait
Wait for target devices
