8
menu and all the LED lights are off. You can use the ▲ and ▼ keys to switch to the function you want to use,
press the Start button (OK button) to start the function, and press ESC key to return to the previous menu.
B. Connect the source hard disk to the master disk (labeled "M") port, and the target disks to be copied to
other target disk ports (recommended to use the same size of master disk and target disks).
6.2 FAST COPY
A.
Use the ▲ and ▼ keys to select “FAST COPY” in the main menu.
B.
Press the Start button (OK button) to start the fast copy operation, and the duplicator will start to recognize
the hard disk.
C.
After the master disk is identified, effective data analysis of the master disk is started.
D.
Fast Copy begins after analysis.
E.
After the copying is completed, the LCD will display the number of copy success (PASS) and failure
(FAIL), and copy time of this round. Press ESC key to exit the current round of copying. After replacing the
targets to be copied, you can start the next round of copying.
7. Functions
7.1 Function List
Note: The values in the brackets shown in the figure below are factory preset values.
