10
1. This function is only available on DUO PlusBlu-ray/DVD/CDDuplicator.
2. The original data content of target USB drive will be erased after the copy
process. Please make sure the data can be erased before copy.
2. Test
This command will simulate the copy process and make sure all target discs
are usable. The test process does NOT write anything to the blank disc(s). A
built-in diagnostic algorism is used to verify the chance of successful copy for
each target disc.
Note:
Test mode can only be done with BD-R, DVD-R and CD-R media.
3. Copy + Verify
This command will perform the copy process, and immediately follow with a
verification process on all target discs automatically. This command is useful
especially for audio CD duplication.
Note
: The verification process uses a
Disc Readability Check
to individually
check the presence of data on each copy. This process does not compare the
contents of duplicated discs against that of the master. It only verifies that the
duplicated discs are readable.
4. Copy + Compare
ENT
2.Test
# 0 : 2048MB => 0
Test x 3 2048M
50%8.9X 1024M
Result
Pass 3 Fail 0
ENT
Verify x 3 2048M
50%8.9X 1024M
Result
Pass 3 Fail 0
3.Copy + Verify
# 0 : 2048MB=> 0
Copy x 3 2048M
50%8.9X 1024M
1024M
Copy process is
finished
ENT
[ Copy ]
3.USB To USB
Data Will Be Erased!
Continue
Copy: 1 2048M
P : 0 F : 0 10%
ENT
Result :
Pass 1 Fail 0
Copy:1: 1 target USB
2048M: source data
P : number of copies passed
F: number of copies failed
10%: rate of copy progress
