16
Control Panel Operation
BUTTON
FUNCTION
ACTION & INDICATION
ON
: Enables control panel functions and
remote control. Turns on flame effect.
OFF
: Disables control panel functions and
remote control. Turns off flame effect.
1.
Press once
, Indicator light turns on.
Power turns on. All functions enabled.
2.
Press again
, Flame effect turns off.
Power and all functions turn off.
BRIGHTNESS button
: Adjusts brightness.
1.
Press once
, Indicator light turns on.
Brightness changes.
1.
Press again,
until desired brightness is
selected.
FLAME button
: Adjusts flame colour.
NOTE:
Flame effect stays on until power
button is turned off. Flame effect must be
on for heater to turn on.
1.
Press once
, Indicator light turns on.
Flame colour changes.
2.
Press again
, until desired colour is
selected.
HEATER button
: Turns heater on and off.
NOTE:
The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE:
To prevent overheating, the heater
blows cool air for 10 seconds before the
heater turns on, and after it turns off.
NOTE:
Heater overrides room temp
control.
1.
Press once
, Indicator light turns on.
Fan blows cool air for 10 seconds. Low
heater (H1) turns on and blows warm air.
2.
Press again
, Indicator light remains on.
High heater (H2) turns on and blows hot
air.
3.
Press again,
Indicator light turns off.
The fan blows cool air for 10 seconds,
then turns off.
TIMER button:
Turns heat on for a certain
time period.
P 1.
Press once,
Indicator lights up.
Heat on time goes to 30 minutes.
2.
Press again,
until desired time length is
reached.
FUEL-BED button:
Adjusts fuel-bed
colour.
NOTE:
Fuel-bed color effect stays on until
power button is turned off.
1
. Press once,
Fuel-bed color changes.
2. Press again,
until desired colour is
reached.
Summary of Contents for MZEFTCEL36
Page 24: ...24 ...
