6
Installation and Assembly
Your appliance is usually fitted into a standard 16
” x 22” fireplace opening. If you’re using an electric
suite, select a suitable location that is not susceptible to moisture build-up. It must be located enough
distance away from curtains, furniture, and high traffic areas. If fitted in a fireplace, chimney must be
blocked off prior to use. See below for more info.
NOTE: Follow all relevant local and national electrical codes.
MINIMUM CLEARANCE TO COMBUSTIBLES
Measurements are taken from the glass front.
Bottom 0" Top 11.8" (300mm) to mantel
Sides 0" Top 11. 8" (300mm) to ceiling
Back 0"
Front 36
” (1000mm) to vent
MINIMUM MANTEL CLEARANCES
WARNING
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
HEAT RESISTANT TO PREVENT DISCOLOURATION.
