background image

 

 

Note:

 

a.

 

When collapsing the sections ensure your fingers 

 

are not between the crossbars to prevent pinching.

 

b.

 

Ensure the locking push buttons are in the correct 
position and do not fofrce the collapse or folding of 

 

components if they do not move freely.

 

c.

 

Do not use the lift if any part is damaged or doesn;t 
seem to be working properly. Contact your dealer 
for advice or assistance.

 

 
 

 

Warranty:

 

 

EZee Life™ products carry a one-year warranty against manufacturing 
defects, faulty materials and workmanship.

 

 

In the event of a defect covered by this warranty, we will, at our 
option, repair or replace the item. Please contact your supplier/dealer 
for assistance should a defect become apparent.

 

 

The warranty does not extend to consequential costs resulting from 
the fault or defect in the product, in particular freight and travel costs, 
loss of earnings, expenses or other expenses which may occur.

 

 

The warranty does not cover normal wear and tear resulting from 
normal use or damage caused by accident, misuse, negligence or 
improper installation or assembly.

 

 

The vendor/manufacturer will not accept responsibility for any 
damages or injury caused by misuse, negligence or non-observance of 
the instructions supplied

.

 

 
 

 
 

Summary of Contents for CH5060









Reviews: