1.800.417.9272
www.ezgmfg.com
19
CARE AND MAINTENANCE
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance. Your power tool
requires no additional lubrication or maintenance. Always
store your power tool in a dry place.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
If a fault cannot be rectified, return the mixer to an authorized
dealer for repair.
Cleaning
• Keep the safety devices, ventilation slots and Motor
housing as free of dirt and dust as possible. Clean the
unit by rubbing it with a clean cloth or blow it clean using
low-pressure compressed air.
• We recommend that you always clean the unit
immediately after using it.
• Clean the unit regularly by rubbing it with a damp cloth
and a little soft soap. Do not use cleaners or solvents;
these will attack the plastic parts in the unit. You must
also ensure that water cannot get into the inside of the
unit.
Carbon Brushes
• If excessive sparking occurs you must have the carbon
brushes checked by a qualified electrician.
• Attention! Only a qualified electrician is allowed to change
the brushes.
