BODY
Page C-7
Repair and Service Manual
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notes, Cautions and Warnings.
B
B
Installation is in the reverse order of removal.
Replace any worn or damaged hardware with new as
required.
Fig. 11 2 + 2 Rear Facing Seat & Foot Rest
2 + 2 Rear Facing Seat & Foot
Rest
Tool LIst
Qty.
Torx Bit, T-45 IP........................................................... 1
Socket, 15 mm ............................................................ 1
Ratchet ........................................................................ 1
Torque Wrench, ft. lbs. ................................................ 1
Wrench, 15 mm ........................................................... 1
1. Remove four hex head bolts (10) that secure the seat
bottom to the hip restraints.
2. Lift the seat bottom (11) up and remove it from the
vehicle.
Fig. 12 Rear Facing Seat Bottom
ITEM
TORQUE SPECIFICATION
35
6 - 9 ft. lbs. (8 - 12 Nm)
37
10 - 13 ft. lbs. (14 - 17 Nm)
SEAT BOTTOM
SEAT BACK
FOOT REST
DRIVER SIDE
HIP RESTRAINT
PASSENGER SIDE
HIP RESTRAINT
SEAT BACK
SUPPORT
