©
10
4. MAIN (SECURITY) BOOKKEEPING
If microswitch no.4 is in ON position (turn
off and on dart machine) you will see on
display main
(
security
)
bookkeeping
which can not be erased. It shows
numbers of played credits. It is double
accounting system for credit key, coin
mechanism and free games. In first line
(players 1 and 2) is number of credits for credit key, on second line (players 3 and 4) is
number of credits for coin mechanism and on third line (players 5 and 6) is number of
credits when free games option was active. When we finished with bookkeeping we get
out putting microswitch no.4 in OFF position.
5. SECONDARY (CUSTOMER) BOOKKEEPING
If microswitch no.5 is in ON position
(turn off and on dart machine) you will
see on display secondary (customer)
bookkeeping. Secondary or customer
accounting system is the same as main
accounting system but it can be erased
and reset to zero (0) by 5 seconds
pressing button
Roulette-Baseball
. Secondary accounting system you can see also when
you turn machine OFF, press button EQUAL and than turn machine ON. You must press
button EQUAL still whole period. If you do that correctly on display you can see number of
credits but when you release button EQUAL bookkeeping will disappear. You cannot
erase accounting system from outside. Only from inside with dip-switch No.5 and pressing
button
Roulette-Baseball
you can erase bookkeeping which mean that user must have
main key from dart machine and be well-informed to erase bookkeeping. When you
finished with bookkeeping you get out putting microswitch no.5 in OFF position.
6. EXTERNAL VIEW OF
SECONDARY (CUSTOMER) BOOKKEEPING
If you put switch in position ON you will prevent external view of secondary (customer)
bookkeeping. In that case it is not possible to see secondary accounting with holding
button EQUAL and switching dart machine on.
7. FACTORY SET UP (reset, initialization)
If microswitch no.7 is in ON position (turn
off and on dart machine) you will see on
display "init EEprom" where you can
refresh Set up with default (factory)
information by pressing button Roulette
approximately 5 seconds. Default set up
you can see on next pages in Table1
and Table 2. When you make initialisation of memory you will erase secondary
accounting system and all temporary credits and games. But main accounting system
would not be erased and because of that it is important that owner of machine use main
accounting system for main control. When you finish or if you do not want make
initialization just putt microswitch no.7 in OFF position.
Fig. 7
Fig. 8
Fig. 9
