example, by fastening or deploying a suitable
device to ensure stability
e)
the ladder must never be shifted into a new
position from above
f)
when the ladder is positioned, attention must
be paid to the risk of collision, e.g. with
pedestrians, vehicles or doors. If possible, lock
doors and windows (except for emergency exits)
in the working area
g)
all risks represented by electrical equipment
in the work area, e.g. high voltage, overhead
lines or other electrical equipment
h)
The ladder must be placed on its feet, not on
the rungs or steps;
i)
The ladders must not be placed on slippery
surfaces (e.g. ice, bare surfaces or clearly
contaminated solid surfaces), unless additional
measures prevent the ladder from slipping or the
contaminated areas are adequately cleaned.
Please note:
a)
Are you in adequate health conditions to use
the ladder? Certain health conditions,
medication intake, alcohol or drug abuse may
constitute a safety hazard when using the ladder
b)
When transporting ladders on roof racks or
in a truck to prevent damage, ensure that they
are adequately fastened/attached
c)
Check the ladder after delivery and prior to
initial use, to determine the condition and
functionality of all parts
d)
Always perform a visual inspection of the
ladder for damage and safe use at the beginning
of each working day during which the ladder will
be used
e)
A regular check is required for commercial
users
f)
Ensure that the ladder is suitable for the
particular use
g)
do not use damaged ladders
h)
remove all residue from the ladder, e.g. wet
paint, dirt, oil or snow
i)
Before using a ladder for work, a risk
assessment should be performed, considering
the legal rules in the country of use.
transport was not performed according to the
applicable instructions for use
-> Alterations/damage caused by modification,
restructuring, accident or external influence
-> Unintentional damage to the product caused
by foreign substances or objects
-> Product overload
-> Repair of the product performed by an
unauthorised service partner. Parts other than
the original parts were used
-> Inadequate installation of the product
In the event of a complaint...
... you must present the purchase receipt to claim
an eventual warranty
... you must notify the specialist dealer within a
reasonable period after discovering the defect or
within the period stipulated in the country of
purchase.
In case of maintenance and repair
... these must be performed by an authorised
service workshop. The authorised service
workshop shall also determine the necessary
measures, according to the requirements. Always
use original spare parts for repairs. If your
dealer is not an authorised service workshop,
ask him to indicate one.
once again, a brief and concise summary of
the items we wish to highlight as
manufacturers:
a)
The stabilization strip must be pulled out
ladder must be placed in the correct
position, e.g., in the correct
mounting angle for landing ladders (inclination
angle approx. 1:4), rungs or steps, in a horizontal
and fully opened position
b)
locking devices, if appropriate, must be
completely secured prior to use
c)
the ladder must be placed on a level, even
and stable surface
d)
a landing ladder should be leaned against a
flat, firm surface and secured prior to use, for
36
Summary of Contents for EVO-PROLEAN
