ladder side down. The installation angle should
be at 65 to 70 degrees.
f) ATTENTION: Stability is everything! Lay
the ladder on a leveled, firm surface before
you entering it. Secure and stablize it. In case
of doubt, get someone to help, who holds and
secures the ladder.
3. How to push the ladder together again
Done with work? Then make it short again:
Unlock the ladder with the four locking latches
at the bottom. You will find them among the
second lowest glazing bars on each side of the
ladder. And now you put the ladder together like
this:
a)
Was the ladder used as a single ladder? First,
loosen the strap which holds together the two
compressed bars on the rear side. Then you fold
up the ladder.
b)
Important: Keep away the ladder and the body
upright. And: it on the outer telescopic rods must
be held, not on the glazing bars. Otherwise you
could pinch your fingers while unlocking and
pushing together.
c)
Now unlock the glazing bars segments on the
rear ladder leg. (G) Simply push in the two
bottom locking latches one after the other. The
locked segments of the glazing bars are resolved
automatically. When that happens, the ladder
slides a little. Now, in the usual way, press in the
two bottom locking latches on the side of the
ladder facing you. Now the ladder is completely
unlocked
d)
Carefully slide the glazing bars into each
other (H) and finally attach the carrying handle.
MAKE SURE YOUR HANDS: Note again - DO
NOT put your hands between the glazing bars
when unlocking and sliding the ladder!
4. How to clean the ladder
First of all, to make sure that the ladder is
permanently safe and working, you must
keep it clean, especially the telescopic
poles and glazing bars segments. Therefore,
remove and wipe dirt, paint, glue and other
debris after use AND
before pushing
together!
This is usually done by a cloth with some
solvent.
Tip:
After cleaning, you can handle the telescopic
bars with silicone spray. Simply take off, spray
and dry the ladder. The generally dry uprights are
important, so that no dust remains.
5. How to store and transport the ladder
a) The Transport
The ladder includes a loose carrying handle,
which you can easily hook in and pull up
to the glazing bars. So, you can carry
the folded ladder well. Transmit them only
if it is completely pushed together.
That protects the telescope rods from
shock and damage. If you transport
them on a roof rack or a loading area,
pay attention for a sufficient backup.
b) Storage
Always store the ladder completely in
compact format. And so that it is protected
from moisture and heat as well as from dirt.
There should also be no heavy objects
lying on it or leaning against it. Make
sure the ladder is easily accessible, but not
a stumbling block. If possible secure it with
a lock against theft and, if it is
permanently installed, also against
unauthorized entry, for example by children.
What else you should know about the use of
your combination ladder
- short and compact
Before use
→
Operating manual:
You own the ladder
and another person uses it? Make the
operating manual available to the user.
→
Completeness and function:
Just the ladder
34
UK
Summary of Contents for EVO-PROSTEP
