4
You can also select wired connection.
Step 1:
connect the device to the LAN Interface of your router with a network cable.
Step 2:
add the device to EZVIZ app by scanning the QR Code on the cover of this manual or at the bottom of the
device.
SIM
RESET
IPC
ACCESS
Network Cable
Step 3
Adding Detectors
1
Enabling the Adding Detectors Mode
Single click the setting button and the voice prompt of the adding detectors mode is to start.
2
Adding Detectors
Take the detector close to the device (within 50cm) and trigger alarm manually. A voice prompt of
the type of the detector starts indicating the corresponding detector is added (up to 32 detectors
are allowed).
……
