12
13
OPERATING INSTRUCTION
(4)
When the bubble function is turned on, neither the
filtering function nor the heating function can be turned
on by pressing the filtering key and the heating key.
4.1.6
Child Lock/Unlock Key
Press
the
key
for
5
seconds,
can
achieve
child
lock
function, that is, in any state, all keys are locked, can
not
be
used
independently.
If
you
want
to
unlock
the
child
lock,
just
press
the
key
again
for
5
seconds
to
unlock;
4.2
Drainage of SPA pool
(1)
a:Use the plug in the repair bag to block the outlet at
the bottom of the pool.see fig A;
b:Open
the
cap
of
the
outlet
pipe
under
the
outer
wall
of
the pool, see fig B;
4.1.4
Filter on/off key:
(1)
When the filtering function is turned off, press the
key once to turn on the filtering function. Press the
filter function again to turn off.
(2)
When the filtering and heating functions are turned
on at the same time, press the filtering key again, and
both heating and filtering functions are turned off at the
same time.
(3)
When the bubble function is turned on, neither the
filtering function nor the heating function can be turned
on by pressing the filtering key and the heating key.
4.1.5
Heating on/off key:
(1)
When both the heating and filtering functions are
turned off, press the heating key.Both filtering and
heating function are started immediately
(2)
When the heating is turned on, press the heating key
again, the heating function is turned off and the filtering
function
can
still
continue
to
work.
(3)
When heating to the set temperature, it enters the
heat preservation state, and
when
the
pool
temperature
is
2
degrees
lower
than
the
set
temperature, the heating
function starts automatically.
c:Connect
a
white
drain
pipe
in
the
pool
set
for
drainage,
see fig C;
(2)Pour
out
the
water
from
the
SPA
pump
first.see
fig
1.Then
connect
the
outlet
of
bubble
and
water
outlet.see
fig
2.Press
bubble
key
and
make
it
work
for
2-3
minutes
to
blow
out
the
remaining
water
inside
the
SPA
pool.
OPERATION OF SPA PUMP
OPERATION OF SPA PUMP
