page 6 of 6
One-Person Setup
IMPORTANT: IN CASE ONLY ONE PERSON TO DO THE SET-UP, PLEASE
FOLLOW BELOW STEPS. ALWAYS USE YOUR COMMON-SENSE AD BE CAU-
TIOUS ALL THE TIME DURING SET UP. IF IT'S TOO HEAVY TO YOU, YOU MAY
GET THE FRAME OPENED FIRST AND THEN PUT THE FABRIC TOP ON LATER.
3. Lock all four corner sliders.
4. Extend telescopic legs one at a time while
walking around the frame. There are three
height adjustments. Do not over pull the leg.
1.
2. Position yourself under the frame, gently
push up from from bottom of central hub and
shake the frame until it fully expanded.
Position frame in open area. Grasp one leg
and lift the frame with three legs off ground
and one pivot on the ground, walk backward to
expand the frame as much as possible.
IMPORTANT: PRINT SPECS
NUMBER OF COLOURS TO PRINT
DO NOT ALTER ARTWORK/DIELINE
3
MAGENTA
YELLOW
BLACK
DIELINE
110mm
IMPORTANT: PRINT SPECS
NUMBER OF COLOURS TO PRINT
DO NOT ALTER ARTWORK/DIELINE
3
MAGENTA
YELLOW
BLACK
DIELINE
