F+D Feinwerk- und Drucktechnik TOP-ino, User Manual

TOP

-ino

User Manual

13  of  

25

F+D

 Feinwerk- und Drucktechnik GmbH

                   Kirchenstraße 38, D - 69239 Neckarsteinach, Germany
                

Phone: +49 6229 7000, Fax: +49 6229 70067

E-Mail: hotline@fuddruck.de, Internet: http://www.fuddruck.de

6. Black intensity

Select the parameter with the 

print/menu 

and 

clear/ff

 keys.

Confirm the selected parameter with 

online/select

 key.

The range is from –5 to +5. A higher value means a higher
contrast in the resin black.
This parameter will be temporary saved in the 

TOP-

ino

, but

will be also temporary overwrite every time from Windows

TM

–

Driver.

7. Intensity Overlay

Select the parameter with the 

print/menu 

and 

clear/ff

 keys.

Confirm the selected parameter with 

online/select

 key.

The range is from –5 to +5. A higher value means a higher
intensity in the overlay.
This parameter will be temporary saved in the 

TOP-

ino

, but

will be also temporary overwrite every time from Windows

TM

–

Driver.

Note:

 Check this parameter, print a testcard. The surface of the

card should be shining.

8. Speed resin black

Select the parameter with the 

print/menu 

and 

clear/ff

 keys.

Confirm the selected parameter with 

online/select

 key.

Slow: 21 mm/sec and High: 42 mm/sec.
This parameter will be temporary saved in the 

TOP-

ino

, but

will be also temporary overwrite every time from Windows

TM

–

Driver.

Note:

 When your are setting this parameter from slow to high,

you have also to increase the black intensity.

9. Print Offset

Select the parameter with the 

print/menu 

and 

clear/ff

 keys.

Confirm the selected parameter with 

online/select

 key.

The range is from –9 to +9. 1 step means  1/12 mm.
This value will be saved as a default.

Note:

 Check the print position and print a testcard.

10. Magnetic Stripe Encoder

Select the parameter with the 

print/menu 

and 

clear/ff

 keys.

Confirm the selected parameter with the 

online/select

 key.

The parameter will be saved in the 

TOP-

ino

.

You can set HiCo or LoCo.

Note:

 Your 

TOP-

ino

 must be prepared for this

settings.(swichtable magnetic head).

black intensity

black int =   0

overcoat int.

over-int. =  0

black speed

speed =  slow

print offset

print offset  +0

magnetic  stripe
set  to  LoCo

magnetic stripe