F.F. Group 41 340, Original Instructions Manual

RD 450 EASY

|   English

6

and keep it pressed.

h

To  lock  the  pressed  On/Off  switch 

(01)

, press the 

lock-on button 

(02)

.

To  switch  off  the  machine,  release  the  On/Off 

switch 

(01)

 or when it is locked with the lock-on 

button 

(02)

,  briefly  press  the  On/Off  switch 

(01)

and then release it.

ADJUSTING THE SPEED

The speed of the switched on power tool can be 

variably adjusted, depending on how far the On/

Off switch 

(01) 

is pressed.

Light  pressure  on  the  On/Off  switch 

(01)

 results 

in a low rotational speed. Further pressure on the 

switch results in an increase in speed.

PRESELECTING THE SPEED

With the thumbwheel for speed preselection 

(03)

, the required speed can be preselected even 

during operation. The required speed depends on 

the material and the working conditions, and can 

be determined through practical testing.

MAINTENANCE

Regular inspection and cleaning reduces the neces-

sity for maintenance operations and will keep your 

tool in good working condition. The motor must be 

correctly ventilated during tool operation. For this 

reason avoid blocking the air inlets.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing as 

waste. Machine, accessories and packaging 

should be sorted for environment - friendly re

-

cycling. The plastic components are labeled for 

categorized recycling.

EXPLANATION OF SYMBOLS 

Double insulation

For indoor use only. Do not expose to 

rain.

Wear eye protection.

Damage to lungs if an effective dust mask 

is not worn.

Wear protective gloves

Damage to hearing if effective hearing 

protection is not worn.

To reduce the risk of injury, the user must 

read and understand this manual before 

using this product.

Important!

Conforms to relevant safety standards

GUARANTEE

This product is warranted in accordance with the 

legal/country  specific  regulations,  effective  from 

the  date  of  purchase  by  the  first  user.  Damage 

attributable to normal wear and tear, overload or 

improper handling will be excluded from the guar-

antee. In case of a claim, please send the machine, 

completely assembled, to your dealer or the ser-

vice Centre for electric power tools.

DECLARATION OF CONFORMITY  

ƒ

We declare under our sole responsibility that this 

product is in conformity with the following stan-

dards  or  standardized  documents:  EN  60745-1,  EN 

60745-2-1, in accordance with the provisions of the 

directives 2006/42/EC

ƒ

Technical File at:

FF GROUP TOOL INDUSTRIES S.A., 

19300, Aspropyrgos - Greece

Loudovikos Tsirigiotis 

Operations & Engineering

FF GROUP TOOL INDUSTRIES S.A., 19300

Aspropyrgos - Greece. 4/5/2018