F.F. Group 43 203, Original Instructions Manual

f

Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

f

Hold power tool by insulated gripping surfaces 

when performing an operation where the cut-

ting accessory or fastener may contact hidden 

wiring.

 Cutting accessory and fasteners contacting 

a “live” wire may make exposed metal parts of the 

power tool “live” and could give the operator an 

electric shock.

f

Use appropriate detectors to determine if util-

ity lines are hidden in the work area or call the 

local utility company for assistance.

 Contact 

with electric lines can lead to fire and electric shock. 

Damaging a gas line can lead to explosion. Pene-

trating a water line causes property damage.

f

When working with the machine, always hold it 

firmly with both hands and provide for a secure 

stance.

 The power tool is guided more secure with 

both hands.

f

Secure the workpiece.

 A workpiece clamped with 

clamping devices or in a vice is held more secure 

than by hand.

f

Always wait until the machine has come to a 

complete stop before placing it down.

 The tool 

insert can jam and lead to loss of control over the 

power tool.

f

Do not open the battery.

 Danger of short-circuiting.

f

Protect the battery against heat, e. g., against 

continuous  intense  sunlight,  fire,  water,  and 

moisture. 

Danger of explosion.

f

In case of damage and improper use of the bat-

tery, vapours may be emitted. Ventilate the area 

and seek medical help in case of complaints.

 The 

vapours can irritate the respiratory system.

f

Use the battery only in conjunction with your  

FF GROUP power tool.

 This measure alone pro-

tects the battery against dangerous overload.

f

The battery can be damaged by pointed objects 

such as nails or screwdrivers or by force applied 

externally.

 An internal short circuit can occur and 

the battery can burn, smoke, explode or overheat.

PRODUCT DESCRIPTION 

AND SPECIFICATIONS

INTENDED USE

The power tool is intended for hammer drilling 

in concrete, brick and stone. It is also suitable for 

drilling without impact in wood, metal, ceramic 

and plastic. Power tools with electronic control 

and right/left rotation are also suitable for screw

-

driving. 

IDENTIFICATION

1.  SDS-plus tool holder

  2.  Locking sleeve

  3.  Rotational direction switch

  4.  On/Off switch

  5.  Selector switch for drilling/hammer drilling

  6.  Button for depth stop adjustment

  7.  Handle (insulated gripping surface)

  8.  Dust protection cap

  9. Led

  10.  Auxiliary handle (insulated gripping surface)

  11.  Depth stop

TECHNICAL DATA

Article number

43 203

Model

CRH/2-20-BL 20V PLUS

Rated voltage

V

20

Impact rate 

bpm

0-4.500

No load speed

rpm

0-1.420

Tool holder

SDS PLUS

Speed control

✓

Right/left rotation

✓

Drilling diameter, max.

Concrete

mm

22

Steel

mm

13

Wood

mm

28

Weight without battery

kg

2,3

Sound emission values determined according  

to EN 60745-1, EN 60745-2-6

Typically the A-weighted noise levels of the product are:

Sound pressure level

dB(A) 

86,4

Sound power level

dB(A) 

96,6

Uncertainty K

dB

3

Vibration total values a

h

 (triax vector sum)  

and uncertainty K determined according  

to EN 60745-1, EN 60745-2-6

Vibration Level

a

h 

m/s

2

6,052

K

m/s

2

1,5

ASSEMBLY

BATTERY CHARGING

The battery supplied is partially charged. To 

ensure full capacity of the battery, completely 

charge the battery in the battery charger before 

using your power tool for the first time.

The lithium-ion battery can be charged at any 

time without reducing its service life. Interrupt-

ing the charging procedure does not damage 

the battery. The lithium-ion battery is protected 

against deep discharging by the “Electronic Cell 

Protection (ECP)”. When the battery is empty, the 

machine is switched off by means of a protective 

circuit: The inserted tool no longer rotates.

f

Do not continue to press the On/Off switch 

after the power tool has been automatically 

switched off. 

The battery can be damaged.

REMOVING THE BATTERY (FIGURE B, C, D,E)

The battery  is equipped with two locking levels 

that should prevent the battery from falling out 

CRH/2-20-BL 20V PLUS

www.ffgroup-tools.com

English   |

9