English |
9
www.ffgroup-tools.com
WDVC 35 PRO
OPERATION
1. FOR DRY CLEAN
Attention! Never operate the vacuum
cleaner without filter / dust bag!
1.
Hold the plug and insert into socket.
2. Press the switch to position I to turn on the vacuum
cleaner
(P20)
.
3.
You can adjust the airflow by push the sliding block
up and down.
(P6, P7)
CONNECTING ELECTRICAL POWER TOOLS
(P24)
Use the socket on the vacuum cleaner for the
purpose defined in the operating instructions
only.
(P18, P19)
Before plugging the power tool into the appli-
ance socket:
1.
Switch off the vacuum cleaner.
2.
Switch off the power tool to be connected.
3. Connect the power tool with the hose of the
vacuum cleaner.
CAUTION! Follow the operating instruc-
tions and safety instructions for applianc-
es connected to the power tool socket.
START/STOP
To operate the vacuum cleaner with electrical
power tool, press the switch of the vacuum
cleaner to the position II and then turn on the
power tool.
(P23)
When the power tool turns off, vacuum cleaner
will turn off after 2-8 seconds.
2. PICKING UP LIQUIDS
ATTENTION! Operate the vacuum cleaner
without filter/dust bag!
1.
Insert the floor brush for water picking up use to
the tube.
2.
Before liquids are picked up, always remove the fil
-
ter / bag
(P11, P16)
and check that the float works
properly. Ιf foam develops or liquid emerges, stop
work immediately and empty the dirt tank, by tak-
ing off the cover let water drain.
(P13, P14, P15)
3. BLOWER FUNCTION
The vacuum cleaner has a blower function to clean
inaccessible places or to dry the surface of wet
items.
Insert the hose connector to the blow swivel of the
vacuum cleaner (II).
(P21, P22)
Do not direct the air into rooms in an uncontrolled
manner. When using the blower function, always use a
clean hose. Stirred- up dust can be hazardous to health.
Do not use the blower function in closed rooms.
Note! ENSURE you turn the unit off at the
very minimum every 15 minutes (for 1 min-
ute) to let the motor cool down - failure to
do so may cause motor failure.
DO NOT use the vacuum cleaner for more
than 4 hours (including rest breaks) during
one day
TO REPLACE DUST BAG (P10, P11)/ FILTER (P16,
P17)
If the filter / dust bag, is full please clean it as soon
as possible.
If the filter/dust bag is damaged replace it imme
-
diately!
1. Release the lock block to open the up housing
(P12)
2. Through the dust bag into dustbin after use.
3. Put back the up housing, and fasten the locking
block
MAINTENANCE
WARNING:
When the filter are obviously
covered with dust or the suction decreases
considerably, please clean it in time. This
can improve the working efficiency and ex
-
tend the life time of the vacuum cleaner.
1.
Take off the filters
2. Clean it carefully with air
3.
Put the clean filters back
STORAGE
Store the vacuum cleaner indoor in a cool, dry area.
All the included accessories can storage on the vac-
uum cleaner.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste. Machine, accessories and pack-
aging should be sorted for environment -
friendly recycling. The plastic components
are labeled for categorized recycling.
GUARANTEE
This product is warranted in accordance with the le-
gal/country specific regulations, effective from the
date of purchase by the first user. Damage attribut
-
able to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In
case of a claim, please send the machine, completely
assembled, to your dealer or the service Centre for
electric power tools.
