F.F. Group 45 995, Original Instructions Manual

English   |

9

www.ffgroup-tools.com

laying of the connection cable.

3. 

Cuts  resulting  from  running  over  the  con

-

necting cable.

4. 

Insulation  damage  resulting  from  force

-

fully pulling out of the wall socket.

5.  Cracks through aging of insulation.

Such defective electrical connection cables must 

not be used as the insulation damage makes them 

extremely hazardous.

LUBRICATION

Periodically lubricate moving parts. Do not oil the 

motor.

CLEANING

Use a small soft brush to clean the outside of the 

unit. Do not use strong detergents. Household 

cleaners  that  contain  aromatic  oils  such  as  pine 

and  lemon  and  solvents  such  as  kerosene  can 

damage  plastic  housing  or  handle.  Wipe  off  any 

moisture with a soft cloth. Remove dust, dirt and 

machining  residues  with  an  appropriate  vacuum 

cleaner if necessary.

STORAGE

WARNING: 

Turn the switch off and remove the plug from pow

-

er source outlet to store the machine. Store the unit 

only in dry and well ventilated areas.

In case the unit will be stored for an extended 

time, use the following storage procedure:

1.  Thoroughly clean the unit and inspect for any 

loose or damaged parts. Repair or replace dam

-

aged parts and tighten loose screws, nuts or 

bolts. 

2.  Lubricate and apply grease, where required.

3.  Store the unit in its original packaging.

ENVIRONMENTAL PROTECTION

Recycle  raw  materials  instead  of  disposing  as 

waste. Machine, accessories and packaging should 

be sorted for environment friendly recycling. The 

plastic  components  are  labeled  for  categorized 

recycling. 

This  product  must  not  be  disposed  of  together 

with  domestic  waste  in  compliance  with  relative 

legislation referring to waste of electrical and 

electronic  equipment.  This  product  must  be  dis

-

posed of at a designated collection point. This can 

occur,  for  example,  by  handing  it  in  at  an  autho

-

rized  collecting  point  for  the  recycling  of  waste 

electrical  and  electronic  equipment.  Improper 

handling of waste equipment may have negative 

consequences  for  the  environment  and  human 

health  due  to  potentially  hazardous  substances 

that are often contained in electrical and elec-

tronic  equipment.  By  properly  disposing  of  this 

product, you are also contributing to the effective 

use of natural resources. 

You can obtain information on collection points for 

waste equipment from your municipal administra

-

tion, public waste disposal authority, an authorized 

body for the disposal of waste electrical and elec-

tronic equipment or your waste disposal company.

WARRANTY

This product is warranted in accordance with the le-

gal / country specific regulations, effective from the 

date of purchase by the first user. Damage attribut

-

able to normal wear and tear, overload or improper 

handling will be excluded from the warranty. In case 

of a claim, please send the machine, completely as

-

sembled, to your dealer or the official service center.

DC 50 PLUS