| English
14
ive insulating tape to prevent a short circuit, fire or
explosion occurring.
POWER CORD
To avoid shock or fire hazard, if the power cord of
the charger is worm or cut, or damaged in any way,
have it replace immediately. Electrical connection
cables often suffer insulation damage. Possible
causes are:
1.
Punch points when connection cables are run
through window or door gaps.
2. Kinks resulting from incorrect attachment or
laying of the connection cable.
3. Cuts resulting from running over the connec
-
ting cable.
4. Insulation damage resulting from forcefully
pulling out of the wall socket.
5. Cracks through aging of insulation.
Such defective electrical connection cables must
not be used as the insulation damage makes them
extremely hazardous.
LUBRICATION
Periodically lubricate joints of moving parts.
CLEANING
Use a small soft brush to clean the outside of the
unit. Do not use strong detergents. Household
cleaners that contain aromatic oils such as pine
and lemon and solvents such as kerosene can
damage plastic housing or handle. Wipe off any
moisture with a soft cloth. Remove dust, dirt and
machining residues with an appropriate vacuum
cleaner if necessary.
STORAGE
WARNING
Turn the switch off and remove the plug from its
power source to store the machine. Store the unit
only in dry and well ventilated areas.
In case the unit will be stored for an extended
time, use the following storage procedure:
1.
Thoroughly clean the unit and inspect for any
loose or damaged parts. Repair or replace da
-
maged parts and tighten loose screws, nuts or
bolts.
2. Lubricate and apply grease, where required.
3. Store the unit in its original packaging.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing as was
-
te. Machine, accessories and packaging should be
sorted for environment friendly recycling. The
plastic components are labeled for categorized
recycling.
This product must not be disposed of together
with domestic waste in compliance with relative
legislation referring to waste of electrical and
electronic equipment. This product must be dis
-
posed of at a designated collection point. This can
occur, for example, by handing it in at an autho
-
rized collecting point for the recycling of waste
electrical and electronic equipment. Improper
handling of waste equipment may have negative
consequences for the environment and human
health due to potentially hazardous substances
that are often contained in electrical and electro-
nic equipment. By properly disposing of this pro
-
duct, you are also contributing to the effective
use of natural resources.
You can obtain information on collection points
for waste equipment from your municipal admi
-
nistration, public waste disposal authority, an
authorized body for the disposal of waste electri
-
cal and electronic equipment or your waste dispo
-
sal company.
WARRANTY
This product is warranted in accordance with the
legal / country specific regulations, effective from
the date of purchase by the first user. Damage
attributable to normal wear and tear, overload
or improper handling will be excluded from the
warranty. In case of a claim, please send the ma
-
chine, completely assembled, to your dealer or
the official service center.
CRS-BL 20V PLUS
