F.F. Group 46 757, Original Instructions Manual

|   English

6

ROS 125/300 PRO

ENGLISH

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Fail

-

ure to follow the warnings and instructions may 

result  in  electric  shock,  fire  and/or  serious  injury. 

Save all warnings and instructions for future refer-

ence. The term “power tool” in the warnings refers 

to your mains-operated (corded) power tool or bat-

tery-operated (cordless) power tool.

WORK AREA

f

Keep work area clean and well lit. Cluttered or dark 

areas invite accidents.

f

Do not operate power tools in explosive atmo-

spheres,  such  as  in  the  presence  of  flammable 

liquids,  gases  or  dust.  Power  tools  create  sparks 

which may ignite the dust or fumes.

f

Keep  children  and  bystanders  away  while  operat

-

ing a power tool. Distractions can cause you to lose 

control.

ELECTRICAL SAFETY

f

Power  tool  plugs  must  match  the  outlet.  Never 

modify the plug in any way. Do not use any adapter 

plugs  with  earthed  (grounded)  power  tools.  Un

-

modified  plugs  and  matching  outlets  will  reduce 

risk of electric shock.

f

Avoid body contact with earthed or grounded sur-

faces, such as pipes, radiators, ranges and refriger-

ators. There is an increased risk of electric shock if 

your body is earthed or grounded.

f

Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the 

risk of electric shock.

f

Do not abuse the cord. Never use the cord for car

-

rying, pulling or unplugging the power tool. Keep 

cord away from heat, oil, sharp edges and moving 

parts.  Damaged  or  entangled  cords  increase  the 

risk of electric shock.

f

When operating a power tool outdoors, use an ex-

tension cord suitable for outdoor use. Use of a cord 

suitable for outdoor use reduces the risk of electric 

shock.

f

If operating a power tool in a damp location is 

unavoidable,  use  a  residual  current  device  (RCD) 

protected supply. Use of an RCD reduces the risk 

of electric shock.

PERSONAL SAFETY

f

Stay alert, watch what you are doing and use com-

mon  sense  when  operating  a  power  tool.  Do  not 

use a power tool while you are tired or under the 

influence  of  drugs,  alcohol  or  medication.  A  mo

-

ment of inattention while operating power tools 

may result in serious personal injury.

f

Use  personal  protective  equipment.  Always  wear 

eye protection. Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will re-

duce personal injuries.

f

Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool. Carrying power tools with your finger on 

the switch or energizing power tools that have the 

switch on invites accidents.

f

Remove any adjusting key or wrench before turn

-

ing  the  power  tool  on.  A  wrench  or  a  key  left  at

-

tached to a rotating part of the power tool may 

result in personal injury.

f

Do  not  overreach.  Keep  proper  footing  and  bal

-

ance at all times. This enables better control of the 

power tool in unexpected situations.

f

Dress properly. Do not wear loose clothing or jew

-

elery.  Keep  your  hair,  clothing  and  gloves  away 

from moving parts. Loose clothes, jewelery or long 

hair can be caught in moving parts.

f

If devices are provided for the connection of dust 

extraction and collection facilities, ensure these 

are connected and properly used. Use of dust col

-

lection can reduce dust-related hazards.

POWER TOOL USE AND CARE

f

Do not force the power tool. Use the correct pow

-

er tool for your application. The correct power tool 

will do the job better and safer at the rate for which 

it was designed.

f

Do not use the power tool if the switch does not 

turn it on and off. Any power tool that cannot be 

controlled with the switch is dangerous and must 

be repaired.

f

Disconnect  the  plug  from  the  power  source  and/

or the battery pack from the power tool before 

making any adjustments, changing accessories, or 

storing power tools. Such preventive safety mea

-

sures reduce the risk of starting the power tool 

accidentally.

f

Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the pow-

er tool or these instructions to operate the power 

tool.  Power  tools  are  dangerous  in  the  hands  of 

untrained users.

f

Maintain  power  tools.  Check  for  misalignment  or 

binding of moving parts, breakage of parts and 

any  other  condition  that  may  affect  the  power 

tool’s operation. If damaged, have the power tool 

repaired before use. Many accidents are caused by 

poorly maintained power tools.

f

Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to be 

performed. Use of the power tool for operations 

different from those intended could result in a haz

-

ardous situation.

SERVICE

Have your power tool serviced by a qualified repair 

person  using  only  identical  replacement  parts. 

This will ensure that the safety of the power tool 

is maintained.

SAFETY INSTRUCTIONS FOR SANDERS

 WARNING: 

Do not operate this tool until it is 

completely assembled and installed according 

to the instructions.

1. 

Hold your power tool by the insulated gripping 

surfaces, especially when performing an opera-