English | 83
www.ffgroup-tools.com
EPHT 1000 PLUS / SPS 250 / SPGT 350 & SPBC 230
43 290
Motor runs but blades
remain stationary
Multitool-attachment not properly
connected to power unit
Check for correct assembly
Machine does not cut
Cutting blade damaged
Replace the blade (always wear protective gloves)
Increased vibration
Cutting blade damaged
Replace the blade (always wear protective gloves)
Debris build up on cutting head
Clean cutting head and remove debris
Blade nut loose
Tighten nut ensuring the blade, rider plate and
dome washer are all present and central (always
wear protective gloves)
Cutting blade incorrectly fitted
Remove cutting blade and refit in a fully central
position. Use guide rings on the blade to ensure
correct central alignment
Machine leaves ragged
finish and/or labours
Grass too high/dense
Grass too high: Cut in stages
Grass too dense: Reduce rate of cutting every time
Cutting blade blunt
Flip/replace blade
Cutting blade obstructed
Check underneath the machine and clear out as
necessary (always wear protective gloves)
Nut cannot be removed to
release cutting blade
Damaged thread on nut/shaft
Lubricate shaft to aid removal
Locking pin not located correctly
Reinsert locking pin and apply light pressure
whilst rotating shaft
Cutting blade fails to
rotate
Cutting blade obstructed
Check underneath the machine and clear out as
necessary (always wear protective gloves)
Blade nut loose
Tighten nut ensuring the blade, rider plate and
dome washer are all present and central (always
wear protective gloves)
Grass too high/dense
Grass too high: Cut in stages
Grass too dense: Reduce rate of cutting every time
Poor cutting performance
Cutting guard encrusted with
debris
Clean inside of cutting guard
Cutting blade blunt
Flip/replace blade
Poor motor performance
Remove cutting system and slip plate and clean
slip plate groove
Summary of Contents for EPHT 1000 Plus SPBC 230
