F.F. Group OS 150 EASY, Instructions Manual

|   English

6

OS 150 EASY

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure 

to follow the warnings and instructions may result 

in electric shock, fire and/or serious injury. Save all 

warnings and instructions for future reference. The 

term “power tool” in the warnings refers to your 

mains-operated (corded) power tool or battery-op-

erated (cordless) power tool.

WORK AREA

f

Keep work area clean and well lit. Cluttered or dark 

areas invite accidents.

f

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable liq

-

uids, gases or dust. Power tools create sparks which 

may ignite the dust or fumes.

f

Keep children and bystanders away while operating a 

power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

f

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adapt-

er plugs with earthed (grounded) power tools. Un

-

modified plugs and matching outlets will reduce risk 

of electric shock.

f

Avoid body contact with earthed or grounded sur-

faces, such as pipes, radiators, ranges and refriger-

ators. There is an increased risk of electric shock if 

your body is earthed or grounded.

f

Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the 

risk of electric shock.

f

Do not abuse the cord. Never use the cord for car-

rying,  pulling  or  unplugging  the  power  tool.  Keep 

cord away from heat, oil, sharp edges and moving 

parts. Damaged or entangled cords increase the risk 

of electric shock.

f

When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suit

-

able for outdoor use reduces the risk of electric shock.

f

If operating a power tool in a damp location is unavoid-

able,  use  a  residual  current  device  (RCD)  protected 

supply. Use of an RCD reduces the risk of electric shock.

PERSONAL SAFETY

f

Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not use 

a power tool while you are tired or under the influ

-

ence of drugs, alcohol or medication. A moment of 

inattention while operating power tools may result 

in serious personal injury.

f

Use  personal  protective  equipment.  Always  wear 

eye protection. Protective equipment such as dust 

mask,  non-skid  safety  shoes,  hard  hat,  or  hearing 

protection used for appropriate conditions will re-

duce personal injuries.

f

Prevent unintentional starting. Ensure the switch 

is  in  the  off-position  before  connecting  to  power 

source and/or battery pack, picking up or carrying 

the tool. Carrying power tools with your finger on 

the switch or energizing power tools that have the 

switch on invites accidents.

ENGLISH

f

Remove any adjusting key or wrench before turning 

the power tool on. A wrench or a key left attached 

to a rotating part of the power tool may result in 

personal injury.

f

Do not overreach. Keep proper footing and balance 

at all times. This enables better control of the power 

tool in unexpected situations.

f

Dress properly. Do not wear loose clothing or jewel-

ery. Keep your hair, clothing and gloves away from 

moving parts. Loose clothes, jewelery or long hair 

can be caught in moving parts.

f

If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used. Use of dust collection 

can reduce dust-related hazards.

POWER TOOL USE AND CARE

f

Do not force the power tool. Use the correct power 

tool for your application. The correct power tool will 

do the job better and safer at the rate for which it 

was designed.

f

Do not use the power tool if the switch does not 

turn  it  on  and  off.  Any  power  tool  that  cannot  be 

controlled with the switch is dangerous and must 

be repaired.

f

Disconnect the plug from the power source and/or 

the battery pack from the power tool before making 

any adjustments, changing accessories, or storing 

power tools. Such preventive safety measures re-

duce the risk of starting the power tool accidentally.

f

Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the pow-

er tool or these instructions to operate the power 

tool. Power tools are dangerous in the hands of un-

trained users.

f

Maintain  power  tools.  Check  for  misalignment  or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s op

-

eration. If damaged, have the power tool repaired 

before use. Many accidents are caused by poorly 

maintained power tools.

f

Keep cutting tools sharp and clean. Properly main

-

tained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

f

Use  the  power  tool,  accessories  and  tool  bits  etc. 

in  accordance  with  these  instructions,  taking  into 

account the working conditions and the work to be 

performed.  Use  of  the  power  tool  for  operations 

different from those intended could result in a haz

-

ardous situation.

SERVICE

Have your power tool serviced by a qualified repair 

person using only identical replacement parts. This 

will ensure that the safety of the power tool is main-

tained.

SAFETY INSTRUCTIONS FOR SANDERS

WARNING: 

Do not operate this tool until it is com-

pletely assembled and installed according to the 

instructions.

1. 

Hold your power tool by the insulated gripping 

surfaces, especially when performing an opera-

tion where the sanding accessory could contact 

hidden wiring.