| English
10
NOTE
According to the applicable product liability laws,
the manufacturer of the device does not assume lia
-
bility for damages to the product or damages caused
by the product that occurs due to:
f
Improper handling no complied with the operat
-
ing instructions.
f
Repairs by third parties and not by authorized ser
-
vice technicians.
f
Installation of non-original spare parts.
f
Non-intended use.
f
Electrical system breakdown due to power of the
machine in a manner not compliant with the elec
-
tric and VDE regulations.
TECHNICAL DATA
Article Number
46 425
46 426
Model
PWH 130 PRO
PWH 170 PRO
Rated
voltage
V
230/240
400/415
Rated
frequency
Hz
50
50
Phase
Ph
1
3
Maximum
operating
pressure
bar
130
170
Maximum
flow rate
l/h
600
840
Thermal
capacity
kW
40
55
Outlet water
temperature
°C
30-140
30-140
Absorbed
power
kW
3
5,2
Motor poles
No
4
4
Motor wor-
king speed
rpm
1.400
1.400
Fuel tank
capacity
l
18
18
Fuel consump
-
tion
kg/h
3,2
4,6
Detergent
tank capacity
l
-
-
Discalling tank
capacity
l
-
-
High
pressure hose
length
m
8
8
Power cable
length
m
5,5
5,5
TECHNICAL DATA
Article Number
46 425
46 426
Model
PWH 130 PRO
PWH 170 PRO
Sound
pressure level
(LpA)
dB(A)
78
85
Sound power
level (LwA)
dB(A)
94
100
Uncertainty
(K)
dB
2
2
Dimensions
(LxWxH)
cm
82x69x87
64x48x76
Net weight
kg
80
90
IDENTIFICATION (Fig. 1)
1. Transport handle
2. Front transport wheel
3.
Rear transport wheel
4. Control panel
5. Fuel tank cap
OPERATION
PREPARING THE UNIT
Unpacking and completing the assembly should be
done on a flat and stable surface, with enough space
for moving the machine and its packaging, always
making use of suitable equipment.
All the fundamental parts and safety devices of the
machine are assembled by the manufacturer. For
reasons of packing and transport, some second
-
ary parts are supplied separately. The user must fit
these parts as explained in the instructions supplied
in each assembly kit (Fig. 2).
FUELING AND LUBRICATION
In the hot water high pressure cleaners a diesel fuel
burner is used for water heating.
Fuel specifications: Diesel for motors.
WARNING
Never smoke whilst refueling and keep fuel away from
all sources of fire or spark. Avoid inhaling the fuel
fumes and always refuel in outside and well ventilated
areas.
To fill the fuel tank (Fig. 3):
1.
Remove the fuel tank cap (Fig. 1.5).
WARNING
Carefully open the tank top as pressure could
have formed inside.
2.
Add fuel to the upper level of the fuel tank. Leave
a minimum 5 mm of space between the top of the
fuel and the inside edge of the tank to allow for
expansion.
3.
Reposition the fuel tank cap and tighten appro
-
priately.
WARNING
Attempting to use the cleaner without fuel may cause
damage to the fuel pump.
PWH 130 PRO | PWH 170 PRO