English | 5
www.ffgroup-tools.com
RH 7-40 PRO
f
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
f
Use suitable detectors to determine if utility lines
are hidden in the work area or call the local util-
ity company for assistance. Contact with electric
lines can lead to fire and electric shock. Damaging
a gas line can lead to explosion. Penetrating a wa-
ter line causes property damage or may cause an
electric shock.
f
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance. The power tool is guided more secure with
both hands.
VIBRATION SAFETY
This tool vibrates during use. Repeated or long-
term exposure to vibration may cause temporary
or permanent physical injury, particularly to the
hands, arms and shoulders.
TO REDUCE THE RISK OF ANY VIBRATION-RE-
LATED INJURY:
First be examined by a doctor and then have regu
-
lar medical check-ups to ensure medical problems
are not being caused or worsened from use. Preg-
nant women or people who have impaired blood
circulation to the hand, past hand injuries, nervous
system disorders, diabetes, or Raynaud’s Disease
should not use this tool. If you feel any symptoms
related to vibration (such as tingling, numbness,
and white or blue fingers), seek medical advice as
soon as possible.
Use tools with the lowest vibration when there is
a choice.
Take vibration-free breaks during each day of work.
Grip tool as lightly as possible (while still keeping
safe control of it). Let the tool do the work.
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the ma-
chine’s rating plate are compatible with the power
supply you intend to connect it to.
This appliance is Class II* and is designed for connec-
tion to a power supply matching that detailed on the
rating label and compatible with the plug fitted. If
an extension lead is required, use an approved and
compatible lead rated for this appliance. Follow all
the instruction supplied with the extension lead.
* Double insulated
: This product requires no earth
connection as supplementary insulation is applied
to the basic insulation to protect against electric
shock in the event of failure of the basic insulation.
GUIDELINES FOR USING EXTENSION CORDS
f
Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
f
Always replace a damaged extension cord or have
it repaired by a qualified person before using it.
f
Protect your extension cords from sharp objects,
excessive heat and damp/wet areas.
f
Use a separate electrical circuit for your tools. This
circuit should be protected with the appropriate
time-delayed fuse. Before connecting the motor to
the power line, make sure the switch is in the OFF
position and the electric voltage is rated the same
as the voltage stamped on the motor nameplate.
Running at a lower voltage will damage the motor.
PRODUCT SPECIFICATIONS
INTENDED USE
The machine is intended for hammer drilling in con-
crete, brick and stone. It is likewise suitable for drill-
ing on purpose of bar-planting and reinforcement.
Also Suitable for chipping on masonry, concrete and
nature stone.
TECHNICAL DATA
Article Number
42 456
Model
RH 7-40 PRO
Rated voltage
V
230-240
Hz
50
Rated power input
W
1.350
No-load speed
min
-1
150-516
Tool holder
mm
18
Impact rate
min
-1
3.120
Impact energy
J
13
Chuck type
SDS-max
Max. drilling diameter
in concrete
mm
40
Weight
kg
7,5
Sound emission values determined according to
EN 60745-1
Typically the A-weighted noise levels of the product are:
Sound pressure level
dB(A)
99
Sound power level
dB(A)
110
Uncertainty K
dB
3
Vibration total values a
h
(triax vector sum)
and uncertainty K determined according to EN
60745-1
Vibration level max:
a
h ,HD
m/s
2
21,09
K
m/s
2
1,5
IDENTIFICATION
1.
SDS-max chuck
2. Tool holder
3. Dust protection cap
4.
Locking sleeve
5. Depth stop
