F.F. Group SPP 1100XF, Original Instructions Manual

|   English

4

SPP 1100XF

SAFETY MEASURES

Read carefully the operating instructions 

before assembling and starting. The appli-

ance must not be used by operators who 

are not thoroughly acquainted with the 

instructions handbook (operating instruc-

tions). Moreover, the appliance must not be 

used by persons under the age of 16.

f

The user is liable towards third parties in the area 

where the appliance is in operation. 

f

Before starting it is necessary to make sure that 

the necessary electrical protection measures are 

provided by means of a test carried out by a spe

-

cialist.

While the pump is operating no operators 

have to be in the liquid to be pumped. 

The pump may be connected only by means 

of a safety switch for fault currents, with 

a rated opening current up to 30 mA and 

a socket with an earth contact installed in 

compliance with the regulations. 

Protection: at least 10 Amps. 

Operation  in  swimming  pools  and  garden 

ponds is not recommended.

For other operation, the provisions in conformity 

with the standard VDE 0100 part 702 must be re

-

spected.

CAUTION: Before checking, unplug the 

pump from the mains! 

f

Replacing the power supply cable requires using 

special  tools  and  therefore  you  must  address  to 

the authorized after-sales service. 

f

The  noise  (continuous  equivalent  in  dbA)  of  the 

motor-driven pumps is less or equal (≤) to 85 dbA. 

f

The voltage indicated on the pump’s rating plate 

must correspond to the available mains voltage. 

f

The temperature of the liquid conveyed must not 

exceed 35°C. 

f

Never  attempt  to  lift  or  move  the  pump  by 

stretching  the  power-supply  cable  whilst  it  is 

plugged into the mains. 

f

Make sure that the plugged electrical connections 

are in an area safe from flooding and are protect

-

ed from humidity. 

f

Before use it is necessary to check that the plug 

and the mains connection line are not damaged. 

f

Unplug  from  the  mains  before  performing  any 

work on the pump. 

f

Avoid  directly  exposing  the  pump  to  the  jet  of 

water. 

f

The user is responsible for complying with the lo

-

cal regulations concerning assembly and safety. 

f

The user by taking appropriate measures (e.g. in

-

stalling an alarm, reserve pump and the like) will 

have to exclude the possibility of indirect damage 

caused by flooding premises due to failure of the 

pump. 

f

In the event of the pump failing, repair work may 

ENGLISH

only be carried out by the repair workshops of the 

technical service. Only genuine spare parts must 

be used. 

f

It  is  notified  that  in  conformity  with  the  law  on 

product  liability  we  cannot  be  held  responsible 

for the damage caused by our appliance: 

1.  Because of improper repairs not carried out by 

the  personnel  of  the  assistance  points  autho

-

rized by us; or 

2.  If genuine spare parts are not used to replace 

parts; or 

3.  If  the  indications  and  provisions  given  in  the 

instructions handbook are not complied with. 

The same provisions hold for the accessories.

RESISTANCE

This  pump  should  not  be  used  to  convey  inflam

-

mable, combustible or explosive liquids.

TECHNICAL DATA

Article Number

434 86

Model

SPP 1100XF

Voltage/Frequence

V

230

Hz

50

Output power

W

1100

Sound power level

dB(A)

85

Max pressure

bar

4,50

Max head

m

45

Max flow

L/h

4600

DN

1

inch

1

2

inch

1

Weight

Kg

10,5

Protection

IPX4

Insulation Class

B

USE

f

For  irrigation  and  watering  of  lawns,  gardens, 

vegetable patches, etc. 

f

For operating garden sprinkler systems 

f

For  drawing  water  from  ponds,  streams,  water 

butts and wells, subject to fitting of suitable filter.

ACCEPTABLE LIQUIDS

In order to pump clear water (fresh water), rainwa

-

ter or non-aggressive chemical cleaning solutions. 

Abrasive liquids or any other type of corrosive liq

-

uid could damage or destroy the pump. 

OPERATING INSTRUCTIONS

It is recommended to use a preliminary filter and 

exhauster with a suction hose, suitable and foot 

valve (reflux lock) to avoid long suction times and 

pointlessly damaging the pump due to stones and 

solid foreign bodies.