BFI57 / P/N BFI57-(xxx)-(xxx)
Operation and Installation
Document-No.: 08.510.010.71e/ Revision: 3.10
26
3.8 Device Configuration
The device configuration comprises basic settings, which need to be
done after installation prior the operational usage of the device, incl.:
- Charging Behaviour (always or only during operation)
- Borders of Coloured Areas within the IAS-Tape
The configuration of the colour bands of the IAS tape needs
to be done carefully in order to avoid misleading indications
of velocity ranges!
The device configuration is not accessible from the normal operation
mode. To access the configuration, switch the device on or reboot
with
while holding the
and
buttons in the moment
when releasing
.
The individual configuration items are run through with
.
The device configuration is automatically left after stepping through all
options and can additionally be left earlier by pressing
.
3.8.1 Switching-On Behaviour
This configuration option defines whether the
device shall be switched on manually (manu) or
whether shall turn on automatically whenever
power is supplied (alw).
If option “alw” is active (white underlined) the
device cannot be switched off as long as power is available.
Even when set to “alw” the device can additionally be turned on
manually when no power is supplied.
Access to Device Configuration
Hold Buttons DIM and QNH+(AUTO)
while switching on or rebooting
Summary of Contents for BFI57
Page 2: ......
