ATR833A-II / P/N 833-II (Axxx)-(Axxx)
Operation and Installation
31
Doc.-No. 01.143A.010.71e / Revision 1.00
3.6 MIC TYPE
– Selection Microphone Type
The next option in the configuration menu is the setting of the
microphone type.
Selecting the microphone type switches the individual microphone
inputs. With the setting "dynamic" the dynamic inputs MIC L dyn and MIC
R dyn become active and the input for standard microphones is switched
off. With the setting "standard" the inputs for standard microphones MIC
L std. and MIC R std become active and the dynamic microphone inputs
are deactivated. This avoids noise on unused inputs.
With setting "auto", a standard microphone works on the standard input
or
a dynamic microphone on the dynamic input.
If the dynamic microphone inputs are occupied, these are automatically
activated and the standard inputs are switched off. If the dynamic
microphones are deactivated via a switch, the standard microphone
inputs are automatically activated.
ACT RX
123.450
SBY
118.275
MICL TYPE
auto
Range: auto, standard, dynamic
ACT RX
123.450
SBY
118.275
MICR TYPE
standard
Range: auto, standard, dynamic
3.7 MIC LEFT / RIGHT
– Microphone Input Sensitivity
The last item in the configuration menu is the setting for the microphone
sensitivity.
The sensitivity can be adjusted with the
VOL/SEL
turn knob. The
sensitivity can be adjusted separately for the left and right microphone
and for each type.
