Chapter 3
System Specifications
3 - 8
ARX-2500 System Power Requirements
The ARX-2500 is powered by two power supplies (1+1 redundancy)
consisting of two power modules and one power system frame. Two power
modules are recommended for full redundancy and load-sharing.
The power supplies require a 10A / 220VAC input cord, which is provided
with the chassis. The AC outlet to the switch must be properly grounded.
ARX-4000 System Power Requirements
The ARX-4000 chassis dissipates 975 watts of power. The control plane
dissipates 600 watts and the data plane dissipates 375 watts. This is
equivalent to 3328 BTUs/hour.
Cable Requirements
For details on the cable requirements for all the ARX models, choose from
the following:
•
ARX-500 Cable Requirements, on page 3-8
•
ARX-1500 Cable Requirements, on page 3-9
•
ARX-2000 Cable Requirements, on page 3-10
•
ARX-2500 Cable Requirements, on page 3-11
•
ARX-4000 Cable Requirements, on page 3-12
ARX-500 Cable Requirements
The following table lists the required cables and power cords for the
ARX-500.
All cables are customer-supplied
except
the AC power cord and console
cable.
Table 3.6
ARX-500 Required Power and Data Cables
Qty.
Cable/Cord
Used on...
Specification
1
AC power cord
AC/DC power supply
Choose from the cables
shipped with the switch:
•
20 A/250 Vac or
•
15 A/120 Vac
Both have IEC-320-type
connectors.
Summary of Contents for ARX-500
