Chassis Overview
ARX Hardware Reference Guide
4 - 17
ARX-2000
Ethernet Management Port LEDs
The out-of-band Ethernet management port is located on the back panel and
is labeled MGMT. The port provides two LEDs (speed and link/activity)
located on the network interface connector. The speed LED is located in the
upper left corner of the connector. For details on the LED and NIC states for
the speed LED, see the following table.
The link/activity LED is located in the upper right corner of the connector.
For details on the LED and NIC states for the link/activity LED, see the
following table.
ARX-2000
Disk Drive LEDs
Each disk drive has a single LED to the right of the drive. This LED does
not provide status details. The LED is either off (not illuminated), which
indicates no drive activity, or it is flickering (blue), which indicates activity
on the drive.
ARX-2000
Power Supply LEDs
Each power supply has a single LED located to the right of the fan. The
LED locations are called out in the following figure.
Figure 4.11
ARX-2000 Power Supply LEDs
Table 4.16
ARX-2000 Management Port Speed LED Indicator
LED State
NIC State
Off
10 Mbps
On green
100 Mbps
On amber
1000 Mbps
Table 4.17
ARX-2000 Management Port Link/Activity LEDs
LED State
NIC State
On steady green
Active connection (Linked)
Flickering green
Transmit/receive activity
Summary of Contents for ARX-500
