Rev. 02-20
Page 7/9
Alu Shower chair with tilt 2024 – User manual
Cleaning
Normal dirt on metal and plastic parts can be removed with standard cleaning agents and a sponge or
a soft rag. Check the specific product information before you use it and use only commercial
cleaning products which are suitable for cleaning and disinfection (do not use alcohol-containing
products and no solvent or abrasives).
For a thorough cleaning it is possible to wash the shower chair in an automatic washing machine or
with saturated water vapor for up to 1 minute at 90° Celsius, or up to 5 minutes at 85° Celsius or up
to 10 minutes at 80° Celsius.
Maintenance
The device does not need much maintenance. Despite the solid construction and the use of resistant
materials the product is subject to wear. It is therefore recommended to check the product at regular
intervals be a professional service.
Warning!
When using the chair in very calcareous water, calcium binding might occur at and around
the wheel bearings and other movable parts. Under such circumstances it can be necessary to
use lime solution and afterwards use lubrication.
Warning!
When using the chair in chlorinated surroundings extra strong corrosion will occur and the
warranty will no longer be effective.
Technical data
2024
Difference with
24” wheels
Seat width
45 cm
=
Seat depth
43 cm
=
Seat height (adjustable)
50 – 60 cm
=
Pass over height
Total width
56 cm
+ 8 cm
Total depth
110 – 120 cm
+ 5 cm
Total height (adjustable)
97 – 141 cm
=
Total weight
15,60 kg
=
Max load
150 kg
+ 2,90 kg
Tilt angle
-5º to + 25º
=
