390 / 390 24
ENGLISH
Guide for the installer
Page 4
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol
draws your attention to the notes on the characteristics and operation of the product.
CE DECLARATION OF CONFORMITY
Manufacturer:
FAAC S.p.A.
Address
:
Via Calari, 10 - 40069 - Zola Predosa - Bologna - ITALY
Declares that:
Operator mod.
390 / 390 24
390 / 390 24
with 230 V~ power supply
is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive
2006/42/EEC;
conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage directive.
2004/108/EC Electromagnetic Compatibility directive.
and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will
become a component has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent
modifications.
Bologna, December 30, 2009
Managing Director
A. Marcellan
•
•
•
•
•
INDEX
IMPORTANT NOTES FOR INSTALLER
page.5
1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
page.5
2. ELECTRICAL EQUIPMENT (standards system)
page.5
3. INSTALLATION OF AUTOMATION
page.5
3.1. PRELIMINARY CHECKS
page.5
3.2. INSTALLATION DIMENSIONS
page.5
3.3. INSTALLATION STEPS
page.6
3.4. TEST OF THE AUTOMATION
page.6
4. MANUAL OPERATING MODE
page.6
5. RESTORING NORMAL OPERATING MODE
page.6
6. MAINTENANCE
page.6
7. REPAIRS
page.6
