background image

31

FAAC International, Inc. (“Seller”) warrants the first Purchaser 
of the product to be free from defects in material and work-
manship for a specific period as defined by the Warranty 
disclosure on the website www.faacusa.com. The Warranty 
Period commences from the date of invoice.

Control Boards, Accessories or Spare Parts factory installed 
or sold with any of the products above carry the same 
warranty period as the product they are sold with, excluding 
batteries that carry a maximum 2 year warranty. 

Products repaired under warranty carry the remainder of 
the original warranty period. For products repaired outside 
of warranty, the Seller warrants that all parts used for the re-
pair will be free from defects in materials and workmanship 
for a period of ninety (90) days. 

Defective products must be returned to Seller, freight 
prepaid by Purchaser, within the warranty period. A Return 
Material Authorization Number (RMA) must be obtained 
before product is returned. Items returned will be repaired 
or replaced, at Seller’s option, upon an examination which 
discloses to the satisfaction of the Seller that the item is 
defective. The Seller will return the warranted item freight 
prepaid. 

This limited Warranty covers the product under the normal 
use and service for which it was intended, provided it has 
been properly installed and operated. Seller’s obligations 
under this warranty shall be limited to the repair or ex-
change of any part. This warranty shall not apply to prod-
ucts or parts thereof which have been repaired or altered, 
without Seller’s written consent, outside of Sellers’s workshop 
or altered in any way so as, in the judgment of Seller, to 
affect adversely the stability or reliability of the product(s) 
or has been subject of misuse, negligence, or accident, or 
has not been operated in accordance with the product’s  
instructions or has been operated under conditions more 
severe than, or otherwise exceeding, those set forth in the 
specifications for such product(s). 

When the warranty service involves the exchange of an 
operator or part, the item the Seller replaces becomes its 
property and the replacement becomes Purchaser’s prop-
erty. The Purchaser represents that all removed items are 
genuine and unaltered. The replacement may not be new 
but will be in good working order and at least functionally 
equivalent to the item replaced. The replacement assumes 
the warranty service status of the replaced item.

The products are not warranted to meet the specific re-
quirements, if any, of safety codes of any particular state, 
municipality, or other jurisdiction, and the Seller doesn’t 
assume any risk or liability whatsoever resulting from the use 
thereof, whether used singly or in combination with other 
machines or apparatus. 

The Seller does not assume nor authorizes any person

 

to as-

sume for them any other liability in connection with the sale 
or use of the products of beyond that extended herein. 

The warranty hereinabove set forth shall not be deemed 
to cover maintenance parts, including, but not limited to 
hydraulic oil, motor brushes, or the like. No agreement to 
replace or repair shall constitute an admission by the Seller 
of any legal responsibility to effect such replacement to 
make such repair, or otherwise. 

All products sold by the Seller are subject to design and/or 
appearance modifications, which are production standards 
at the time of shipment. The Seller may, but shall not be 
required to, modify or update products shipped prior to a 
current production standard.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRAN-
TIES EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR USE. THIS WARRANTY 
SHALL NOT APPLY TO PRODUCTS OR ANY PART THEREOF WHICH 
HAVE BEEN SUBJECT TO ACCIDENT, NEGLIGENCE, ALTERATION, 
ABUSE, OR MISUSE OR IF DAMAGE WAS DUE TO IMPROPER 
INSTALLATION OR USE OF IMPROPER POWER SOURCE, OR IF 
DAMAGE WAS CAUSED BY FIRE, FLOOD, LIGHTNING, ELECTRI-
CAL POWER SURGE, EXPLOSION, WIND STORM, HAIL, AIRCRAFT 
OR VEHICLES, VANDALISM, RIOT OR CIVIL COMMOTION, OR 
ACTS OF GOD. 

The Seller shall not be liable for any loss or damage what-
soever resulting, directly or indirectly, from the use or loss 
of use of the product(s). Without limiting the foregoing, this 
exclusion from liability embraces a Purchaser’s expenses for 
downtime or for making up downtime, lost profit, damages 
for which the Purchaser may be liable to other persons, 
damage to property, and injury to or death of any persons. 

This limited warranty extends only to wholesale custom-
ers who buy directly through the Seller’s normal distribution 
channels. The Seller does not warrant its products to end 
consumers. Consumers must inquire from their selling dealer 
as to the nature and extent of that dealer’s warranty, if any.

THE LIMITED WARRANTY OFFERED HEREIN IS THE SOLE AND 
EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER. CORREC-
TION OF DEFECTS, IN THE MANNER AND FOR THE PERIOD OF 
TIME DESCRIBED HEREIN, SHALL CONSTITUTE THE COMPLETE 
FULFILLMENT OF ALL LIABILITIES OF SELLER TO THE PURCHASER 
WITH RESPECT TO THE COVERED PRODUCT, AND SHALL CON-
STITUTE FULL SATISFACTION OF ALL CLAIMS, WHETHER BASED 
ON CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE. 
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY LOSS OF PROF-
ITS OR ANY INDIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL 
OR PUNITIVE DAMAGES ARISING OUT OF SELLER‘S BREACH OF 
THIS LIMITED WARRANTY, OR ARISING OUT OF THE CUSTOMER’S 
INABILITY TO USE THE COVERED PRODUCT, EVEN IF SELLER HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow the exclusion or limitation of inci-
dental or consequential damages, so the above limitation 
may not apply to a particular Purchaser. This Limited War-
ranty gives the Purchaser specific legal rights. The Purchaser 
may also have other rights, which vary from state to state.

LIMITED WARRANTY

Summary of Contents for 422 Standard

































Reviews: