28
13. ACCESSORIES
Use of the safety edge with conductive element is facilitated
by the possibility of housing the special control unit (fig. 31) on
the operator.
The outside release device can be installed with lever system
(fig. 32 ref. A) or key (fig. 32 ref. B).
The central support (fig. 33) offers a central fixing point also for
the one-piece sliding guide.
Using the RP receiver, its range can be increased with the
special antenna. To install the antenna on the automatic
system, drill the housing from the inside in the controlled area
(fig. 34) and fix the antenna with the special nut (fig. 35).
Using the RP2 868SLH receiver, the second channel can be
used for the STOP command or for activating other devices
(e.g. lighting systems) using the free contact output.
The buffer battery kit will activate the automated system in the
event of a power cut. The battery is housed in an appropriate
enclosure located outside the operator.
For installation, see the instructions for the individual
accessories.
Fig. 31
Fig. 32
Fig. 33
Fig. 34
Fig. 35
