FAAC 740, Manual

14

ENGLISH

Fig. 11

Fig. 11

Connection of two pairs of closing photocells and two edge safety

devices

Connection of two pairs of closing photocells and two edge safety

devices

Fig. 12

Fig. 12

Connection of a pair of closing photocells, a pair of opening photocells

and a pair of opening/closing photocells

Connection of a pair of closing photocells, a pair of opening photocells

and a pair of opening/closing photocells

4.2. J7 Terminal board - Power supply (fig. 2)

POWER SUPPLY (

TERMINALS

PE-N-L):

PE:

Earth connection

N:

230 V~ power supply ( Neutral )

L:

230 V~ power supply ( Line )

For correct operation, the board must be connected to the earth conductor 

in the system. Install an adequate differential thermal breaker upstream 
of the system.

4.3. J6 Terminal board - Motors and flashing lamp (fig. 2)

MOTOR - (terminals 13-14-15):

 Motor connection. In gearmotors with 

a built-in control unit, this connection is pre-wired standard. PFor leaf 

opening direction, see basic programming in Chpt 5.1. 

LAMP - (terminals 16 -17):

 Flashing lamp output ( 230 V ~)

4.4. J1 Terminal board  - Accessories (fig. 2)

OPEN A - “Total Opening” command (terminal 1):

 any pulse generator 

(push-button, detector, etc.) which, by closing a contact, commands 

total opening and/or closing of the gate leaf.

To install several total opening pulse generators, connect the N.O. contacts 
in parallel (see fig. 14).

OPEN B - “Partial opening “ or “Closing” command (terminal 2):

 any 

pulse generator (push-button, detector, etc.) which, by closing a 

contact, commands partial opening and/or closing of the gate leaf. 

In the B and C logics, it always commands gate closure.

To install several partial opening pulse generators, connect the N.O. 
contacts in parallel (see fig. 14).

•

•

•

•

•

•

•

Fig. 13

Fig. 13

Connection of a pair of closing photocells and a pair of

opening/closing photocells

Connection of a pair of closing photocells and a pair of

opening/closing photocells

Fig. 14

Fig. 14

Connection of two N.O. contacts in parallel

(e.g. Open A, Open B)

Connection of two N.O. contacts in parallel

(e.g. Open A, Open B)