A1400 AIR RDT
20
532119 04 - Rev. C
Lt
50
50
Vp
La
4
Tr
ansla
tion of the original instruc
tions
ENGLISH
5. CUT THE PROFILES
In case of A1400 AIR RDT KIT supply, the profiles must be cut to the
indicated measure. This operation is performed in the shop. After
cutting, assemble the components to the support profile.
Handling instructions:
19
.
RISKS
PERSONAL PROTECTIVE EQUIPMENT
REQUIRED TOOLS
Use a circular or linear saw cutting machine with blade suitable for
cutting metals.
It is forbidden to use a hand saw.
Only use equipment in good conditions and fitted with all the
required safety devices.
Always comply with the instructions provided by the equipment's
manufacturer.
Cutting operations may only be performed by personnel authorised
to use the equipment.
Perform the cuts to the measures set out in
8
.
8
Profile cutting measurements
Profile to be cut
Cutting measurement [mm]
- Support profile
- Head section cover
- Self-supporting profile (OPTIONAL)
Lt = Vp x 1.5+ 100
The head section length (Lt) must be calculated based on the measurement of the passage opening (Vp).
100 mm is the measurement of the overlap between leaves (50 + 50). If the overlap is different, the Lt measurement
varies accordingly.
The passage opening measurement (Vp) taken on the installation must already be known when placing the order
since the profiles can be supplied in 6100 mm-long rods.
- Leaf connection profile (OPTIONAL)
- Lower guide profile (OPTIONAL)
La
The leaf width measurement (La) depends on the passage opening measurement (Vp), on the number of leaves and
the planned overlap.
Summary of Contents for A1400 AIR RD
Page 1: ...A1400 AIR RDT EN16005 2012...
Page 112: ...A1400 AIR RDT 112 53211904 Rev C...
Page 116: ...A1400 AIR RDT 116 53211904 Rev C...
Page 117: ...Translation of the original instructions ENGLISH...
