A1400 AIR RDT
33
532119 04 - Rev. C
1
37
38
Tr
ansla
tion of the original instruc
tions
ENGLISH
9.2 MOUNT PROFILES ON THE LEAVES
!
Before installing the leaves, ensure there is no cutting or dragging
hazard.
Check leaf verticality.
Remove any protrusions and/or sharp edges on the frame and leaves.
1. Position and fasten the attachment profile on the top of the leaf
37
.
!
Use suitable screws for the weight of the leaf with adequate tighten-
ing torque.
2. Position and fasten the lower guide profile on the bottom of the
leaf
38
.
9.3 MOUNT THE LOWER BRUSH STRIP
(OPTIONAL ACCESSORY)
1. Cut the brush strip to the same length as the leaf.
2. Insert the brush strip in the suitable housing of the lower guide
profile
38
-
.
GLASS LEAVES
For installation of glass leaves see the dedicated section:
§ 10
40
.
9.4 INSTALL LEAVES
Install each leaf as described below.
-
Adhere to the dimensions set out in diagrams
104
to
108
and :
-
108
-
106
for RIGHT single leaf automations
-
109
-
107
for LEFT single leaf automations
-
110
-
109
for DOUBLE leaf automations
For manual lifting, arrange for 1 person every 20 kg to be lifted.
!
Adjust the counter wheel
52
39
.
Screws not supplied.
Summary of Contents for A1400 AIR RD
Page 1: ...A1400 AIR RDT EN16005 2012...
Page 112: ...A1400 AIR RDT 112 53211904 Rev C...
Page 116: ...A1400 AIR RDT 116 53211904 Rev C...
Page 117: ...Translation of the original instructions ENGLISH...
