C4000I
8
532100 - Rev.A
Tr
ansla
tion of the original instruc
tions
ENGLISH
This product is placed onto the market as “partly
completed machinery”, therefore it cannot be com-
missioned until the machine in which it will be incor-
porated has been identified and declared to conform
to the Machinery Directive 2006/42/EC by the actual
Manufacturer.
!
Incorrect installation and/or incorrect use of the
product might cause serious harm to people.
Read
and comply with all the instructions before starting
any activity on the product.
Keep these instructions
for future reference.
Perform installation and other activities adhering to
the sequences provided in the instructions manual.
Always comply with all the requirements contained in
the instructions and warning tables at the beginning
of the paragraphs. Always comply with the safety
recommendations.
Only the installer and/or maintenance technician
is authorised to work on the automation compo-
nents. Do not modify the original components
in any way.
Close off the work site (even temporarily) and prevent
access/transit. EC countries must comply with the
legislation that transposes the European Construction
Site Directive 92/57/EC.
The installer is responsible for the installation/testing
of the automation and for completing the Register of
the system.
The installer must prove or declare to possess technical
and professional proficiency to perform installation,
testing and maintenance activities according to the
requirements in these instructions.
Installation activities require special work conditions
to reduce to the minimum the risks of accidents and
serious damage. Furthermore, the suitable pre-
cautions must be taken to prevent risks of injury to
persons or damage.
!
The installer must be in good physical and mental
condition, aware of and responsible for the hazards
that may be generated when using the product.
The work area must be kept tidy and must not be
left unattended.
Do not wear clothes or accessories (scarves, bracelets,
etc.) that may get caught in moving parts.
Always wear the personal protective equipment rec-
ommended for the type of activity to be carried out.
The required level of workplace lighting must be equal
to at least 200 lux.
Operate CE marked machinery and equipment in com-
pliance with the manufacturer's instructions. Use
work instruments in good conditions.
Use the transport and lifting equipment recommend-
ed in the instructions manual.
Use safety-compliant portable ladders of adequate
size, fitted with anti-slip devices at the top and
bottom, equipped with retainer hooks.
2. SAFETY RECOMMENDATIONS
2.1 INSTALLER SAFETY
2.2 TRANSPORT AND STORAGE
!
Follow the instructions
on the packaging dur-
ing handling.
Use a forklift or pallet
truck, following safety
regulations to avoid
the risk of impacts or
collisions.
4
Symbols: markings on packaging
Read the instructions
Handle with care. Fragile parts
Store away from water and humidity
Percent storage humidity
Storage temperature
DO NOT stack pallets
3
Maximum number of stackable packages
This way up: DO NOT turn over
CE marking
PALLETISED SUPPLY
RISKS
PERSONAL PROTECTIVE EQUIPMENT
