10.
SET THE XKP W SLAVE
This operation is irreversible and converts the XKP W, which is factory set to
Master, into a Slave device. A Slave XKP W can learn, but cannot teach a radio
code.
When the XKP W is waiting for an operation, enter:
10 # 105 #
11.
RANDOMISE THE RADIO CODES
This reassigns new radio code to the XKP W for all radio channels. Once this has
been done, the XKP W keeps the settings and any user codes that were created,
but in order for it to function, the XKP W has to be stored again on all the radio
receivers on which it has to be operate.
When the XKP W is waiting for an operation, enter:
11 # 114 #
12.
EASY OR ADVANCED OPERATION
It is only possible to carry out this operation if the user code memory is empty.
When the XKP W is waiting for an operation, enter:
12 # 0 #
(enables East Operation)
Or
12 # 1 #
(enables Advanced Operation)
Signal on XKP W
OK
✓
1 beep for 0.5 s (Green LED on)
ERROR
5 beeps (Red LED fast flashing)
TIMEOUT
60 s (Red LED flashing)
Waiting for operation
STANDBY
LED on (Green and Red)
