This operation is carried out from the control keypad.
Before a device is eliminated, a
LEARNING
session
must be carried out:
- type in the access code,
- press the configuration push-button,
- select the
INSTALLATION
menu and confirm.
The message
OPEN THE CONTROL UNIT
COMPARTMENT
is shown, if this compartment is not
already open.You have one minute to open it. When this
time has elapsed, opening the control unit trips the
sabotage alarm. Press the OFF Key of the remote-
control to stop the alarm.
- select the
DELETE DEVICES
menu and confirm,
- select the device to be eliminated, by pressing keys
and
or by directly pressing the TEST push-
button of the device to be eliminated (not including
remote-controls),
- the identification number and, subsequently, the name
of the device will be shown after confirmation.
- press the
key until you see the message
PLEASE CONFIRM
in the display, and then confirm.
OK
OK
+
-
+
-
Deleting one device at a
time
C
INFO
OK
+
-
OK
OK
+
-
C
INFO
+
-
OK
OK
+
-
C
INFO
OK
OK
OK
+
-
C
INFO
INFO
+
-
OK
OK
+
-
C
INFO
+
-
OK
OK
+
-
C
INFO
+
-
OK
OK
+
-
C
INFO
OK
OK
OK
+
-
C
INFO
INFO
OK
OK
OK
+
-
C
INFO
OK
Select a device with the +
and - push-buttons of the
keypad
Select a device by
pressing the relevant
TEST push-button
Deleting system’s devices
Deleting
28
