7
The protection mode will differ according to the type of
life of the persons present in the rooms to be
protected.
In fact, theft can occur even if some persons are
present in the rooms.
Thanks to this alarm system, it is possible to protect
only one part of the dwelling, or to use only one type
of sensor (e.g.: the opening contacts and the glass
breakage sensors, but not the movement sensors)
thus appropriately creating the protected areas.
With pets
An area exclusively including the openings (perimeter
protection) must be specified:
- if you are absent and only animals remain in the
house, enable the alarm solely in this area,
- in case of general absence (holidays for example),
turn ON the alarm completely: in this way all the
detectors will be included.
With a garage
Specify an area for the garage:
- to simultaneously protect both house and garage,
there is no need to create an area for the dwelling only:
total protection can be used.
With a house with several floors
Specify an area for each floor:
- basement with garage and dwelling on the upper floor,
- ground floor inhabited in the daytime and bedrooms on
first floor,
- dwelling on first floor and shop on ground floor.
AREA 1
house
perimeter
Perimeter protection with pets
AREA 1
garage
Protection of a separate garage
AREA 1
first floor
AREA 2
ground floor
Protection of first and ground floors
Operation according to
areas
Import
Import
ant:
ant:
- the alarm can be enabled in one area only at a time
(or it can be enabled completely),
- each detector can be used in one or more areas;
every detector need not be integrated in an area,
- an alarm can be partially enabled from the control
keypad.
Presentation
