X 1
X 1
P
X 1
X 2
P
ON
P
ENGLISH
6
4 MEMORY STORING THE FIRST RADIO
UP
DOWN
STOP /
PREFERRED POSITION
PROGRAMMING
PUSH-BUTTON
1) Supply power to the motor.
2) The motor performs a brief movement in both direction to confirm the memory is empty.
3) Within 10 seconds, press the programming push-button “P” for 2 seconds and within the following 10 seconds, press
the stop/preferred position push-button.
4) The motor performs two brief movements in both directions to confirm the performed memory storing.
WITHIN 10 SECONDS
2 seconds
1 ) D U R I N G T H E M E M O RY S T O R I N G P H A S E O F T H E F I R S T R E M O T E C O N T R O L A N D T I L L T H E E N D O F
T H E S E T- U P P R O C E D U R E , T H E M O T O R O P E RAT E S I N D E A D - M A N M O D E . ( P U S H - B U T T O N H E L D D O W N )
2) BEFORE COMPLETING THE SET-UP, THE MOTOR COULD ROTATE IN THE OPPOSITE DIRECTION TO THE GIVEN COMMAND (E.G.: YOU
PRESS THE UP PUSH-BUTTON AND THE ROLLING SHUTTER LOWERS); AT THE END OF THE SET-UP, THE UP OR DOWN PUSH-BUTTONS
ARE AUTOMATICALLY MATCHED TO THE CORRECT DIRECTION OF ROTATION.
Fig.8
Fig.9
WITHIN 10 SECONDS
5 SET-UP (SETTING THE TRAVEL LIMITS)
The SET-UP procedure enables you to set, by pressing the connected push-buttons, the up and down travel limit
and the correct functions for the rolling shutter to be motorised (ROLLING SHUTTER MODE, STANDARD AWNING MODE
AND CASSETTE AWNING MODE).
The SET-UP procedure can only occur in AUTOMATIC mode (with two modes) or in MANUAL mode.
The
AUTOMATIC SET-UP
is possible for rolling shutters only,
The
MANUAL SET-UP
is possible for all applications (ROLLING SHUTTER, STANDARD AWNING OR CASSETTE AWNING).
2 seconds
REAR
VIEW
MAX. 20 RADIO DEVICES CAN BE STORED IN THE MEMORY OF THE MOTOR INTERNAL RECEIVER (WALL-MOUNTED REMOTE CONTROLS,
RADIO ANEMOMETERS, ETC.). MEMORY STORING CAN OCCUR IN ANY MOTOR STATUS.
IF THE SUN SENSOR IS ENABLED ON THE MOTOR, THE COMMANDS SENT BY ANY ALREADY MEMORY-STORED REMOTE CONTROL ARE
INHIBITED; DISABLE FIRST THE SUN SENSOR USING THE REMOTE CONTROL.
Portable remote control
Wall-mounted remote control
CHANGE RADIO
CHANNEL
ENABLE
DISABLE
SUN SENSOR
