Installation Instructions
Ford Replacement Bumper
Product Number: S2560
Application: ’11-Current Ford Super Duty
Copyright 2010 Fab Fours, Inc.
Page 3 of 9
S2550 Rev D_Rev C
II.
Tools Required
Socket Wrench With
Extension
5/32” Allen Wrench
1/8” Allen Wrench
18mm Socket
3/4” Socket
3/4” Open End Wrench
7/16” Open End Wrench
3/8” Open End Wrench
7/32” Socket
Phillips Screwdriver
III.
Vehicle Preparation
1
1
.
.
Disconnect factory fog lamp harness from the connector on the lower radiator
core support.
2
2
.
.
Unclip the splash mat from the factory bumper and fold up out of the way.
3
3
.
.
Remove bumper support bracket screws from the body mount bracket behind
the bumper with a 13mm wrench or socket.
4
4
.
.
While supporting the bumper, unscrew the main bumper mounting bolts from
the front face of the bumper (Shown Below). The bolts will remain captive in
the bumper.
Figure 1 - Bumper Mount Bolts
