INSTRUCTION BOOKL: PELLET STOVE FOR LOCAL AIR HEATING .
DESIGN INNOVATION SUSTAINABILITY FUNCTIONALITY HIGH PERFORMANCE
51/80
Room temperature °C
≤ 20
21
22
23
24
≥25
Power
3
3
3
3
3
3
Operation Mode
Normal Operation
After the ignition process (page 26), stove
switches to normal operation mode.
In this phase, the equipment's objective is to
reach the reference room temperature,
defined by the user.
How does the salamander behave?
Powers 1,2,3,4,5 e 6:
If the user has chosen
power 1,2,3,4,5 or 6, the system always
uses the reference power until the desired
room temperature is reached.
Practical example
Room temperature: 20ºC
User defined:
Power in use: 3
Target temperature: 25º C.
Regardless of the temperature in the
room, the stove never changes its
consumption mode, it always uses
the reference power 3, set by the
user, until the target temperature,
25ºC, is reached.
The table below exemplifies the
behaviour of the stove:
D1
D4
D2
As shown in the image below, during normal
operation, the time (12h38min), the power (3)
and the ambient temperature (25ºC) will be
shown on the touchscreen of the control
panel, in the respective zones D1/D2/D4¬.
