INSTRUCTION BOOKL: PELLET STOVE FOR LOCAL AIR HEATING .
DESIGN INNOVATION SUSTAINABILITY FUNCTIONALITY HIGH PERFORMANCE
60/80
Security
The appliance is equipped with safety
features to prevent accidents and damage.
Fireproof Glove -
The fireproof glove is
supplied by the manufacturer and must be
used whenever the equipment (connected)
is to be handled (with the exception of the
control panel);
Safety thermostat –
The appliance is fitted
with a safety thermostat inside to prevent
the appliance from continuing to operate in
the event of a fault causing the pellet tank to
overheat (e.g. failure of the ambient fan);
Safety door switch –
Ensures that the
power to the equipment is interrupted if the
user opens the door incorrectly during
operation. In this way the system interrupts
the burning, to reduce the flame and avoid
burns.
Never open the door during the
operation of the equipment in order to
preserve your safety.
Exhaust fan encoder –
Shuts down the
appliance if there is any malfunction in the
fume/gas extraction fan.
Recommendations:
Do not touch the equipment when it is
running in order to avoid burns. If you
wish to do so, use the glove provided for
this purpose.
Do not carry out any maintenance
operation while the equipment is running.
The power supply must always be
disconnected.
If there is an error on the control panel, do
not unplug the stove directly from the
socket. Wait for the appliance to cool
down and complete the OFF procedure.
If you disconnect the unit directly at the
plug, the absence of fan operation may
cause unwanted heating of the unit and
release
fumes/gases
into
the
environment. This can cause carbon
monoxide poisoning!
Do not place the equipment under
combustible surfaces.
Thorough cleaning at the beginning and
end of the use period.
Control Panel Blocked
For safety reasons the control panel blocks.
To unlock, press 3 buttons simultaneously
on the control panel until it unlocks.
In the images on the side we have an
example, in which the P1
, P2
and P4
buttons.
P1
P2
P4
