INSTRUCTION BOOKL: PELLET STOVE FOR LOCAL AIR HEATING .
DESIGN INNOVATION SUSTAINABILITY FUNCTIONALITY HIGH PERFORMANCE
8/80
Voltage
Nominal
230
V
Frequency
Nominal
50
Hz
Electric power
Nominal
At start-up
150
950
W
W
Minimum distance to combustible materials
Side
Front
Top
Back
500
700
1000
900
mm
mm
mm
mm
Weight
164
kg
Max. heating volume
*
264
m
3
Certified fuel
Exclusively wood pellets
EN 14691-2 A1
*
Value that could vary depending on the type of isolation (Calculation made to 30 Kcal/h for m3)
.
Standards, Certification and Technical Characteristics (continued)
Materials and Components
The fab brand does not neglect the end-
of-life of its products. It clearly advocates
a path guided by choices that can
contribute to a sustainable future! It
develops innovative products with respect
for
people
and
nature,
and
environmental responsibility is reflected
in all its iterations.
The user is responsible for the effective
(free) return of the appliance at the end of
its life to the appropriate collection
facilities, e.g. collection centres for
electrical and electronic equipment, or by
returning it to the retailer when purchasing
an equivalent new appliance. Under
penalty of penalty.
The sanctions to be applied are those
contemplated in the legislation on waste
disposal in force.
Manufacturers and retailers fulfil their
individual
responsibilities
for
environmentally
compatible
recycling,
treatment and disposal either directly or by
participating in collective systems.
For more information on collection systems,
please contact your local waste disposal
service or the appliance manufacturer.
The appropriate selective collection and
subsequent forwarding of the appliance for
recycling,
treatment
and
compatible
environmental disposal is essential to avoid
possible
negative
effects
on
the
environment and on health. This makes a
positive contribution to the recycling of
materials and components.
At the end of its life, the appliance must be
decommissioned
and
recycled
as
described in the European Directive
(WEEE). The disposal of the various parts
must be carried out in accordance with
European Standards and local and
national regulations.